.....
-
 -

     
        FOR SINGLE OR TWIN NEEDLE (REGULAR) SMALL ROLLER
       
        Diameter 25mm Roller. 28~30mm Between Needle and Roller. For Short Thin Material, Curve and Short Sewing.
-  
 


     
        FOR SINGLE OR TWIN NEEDLE (REGULAR)
       
        Diameter 55mm Roller. More than 50mm Between Needle and Roller. For General Material
   
- -

     
        FOR FLAT BED COVERSTITCH
       
        Special Bracket. Diameter 55mm Roller. More than 65mm Between Needle and Roller. For General Materisal.

     
        FOR CYLINDER BED COVERSTITCH
       
        Special Bracket. Lower Roller and Diameter 55mm roller. More than 65mm Between Needle and Roller. For General Material.
--
 
   
Special Order Only ¡@Example  
   
- -
     
        FOR SINGLE OR TWIN NEEDLE WITH UPPER AND LOWER ROLLER (REGULAR)
     
        FOR SINGLE OR TWIN NEEDLE WITH UPPER AND LOWER ROLLER (HEAVY DUTY) (Transmission P-1)
       
        Powerful Upper and Lower Roller, Daiameter 55mm Roller. More than 130mm Between Needle and Roller. For General Material.
     
        FOR LONG ARM, AVAILABLE FOR CUSTOM-MADE
-
 
     
        FOR FEED-OFF-ARM (REGULAR)
     
        FOR FEED-OFF-ARM (HEAVY DUTY) (Transmission P-1)
       
        Daiameter 55mm roller. More than 60mm Between Needle and Roller. For General Material
 
- -
   
     
        FOR SINGLE OR TWIN NEEDLE WITH UPPER AND LOWER ROLLER (HEAVY DUTY)
       
        Fix on Table. Powerful Upper and Lower Roller, Daiameter 55mm Roller. More than 130mm Between Needle and Roller. For General Material
     
        FOR COVERSTITCH
       
        Fix on Table. Powerful Upper and Lower Roller, Daiameter 55mm Roller. More than 130mm Between Needle and Roller. For General Material
-
-
   
     
        FRONT PULLER (FOR SPAGHETTI SEWING)
     
        FOR BLINDSTITCH MACHINE WITH MOVEABLE ARM (SUITABLE FOR DIVING-SUIT MATERIAL)
       
        Drive Belt Feed. For Diving Suit Mateiral
-
-
   
     
        FOR LONG ARM BLINDSTITCH MACHINE WITH MOVEABLE ARM (SUITABLE FOR DIVING-SUIT MATERIAL)
     
        FOR OVERLOCK WITH SMALL ROLLER (FOR THIN MATERIAL)
       
        Daiameter 28mm Roller. For Thin Material
-
 
 
     
        FOR OVERLOCK WITH REAR DRIVE BELT (FOR THIN MATERIAL)
       
        Feeding By Timing Belt. For Thin Material
-
   
     
        FOR OVERLOCK WITH TOP DRIVE BELT
       
        Feeding By Timing Belt. For Multi-Layer Tough Abrasive and Silky Material
     
        FOR OVERLOCK
       
        Special For Knit Collars. With Knee Pneumatic Switch to Act the Moveable Folder Right or Left Side.
-
 
   
     
        FOR OVERLOCK WITH UPPER AND LOWER ROLLER
       
        Powerful Upper and Lower Roller, Daiameter 55mm Roller. More than 200mm Between Needle and Roller. For Thin to Very Thick Material.
     
        FRONT PULLER (FOR SPAGHETTI SEWING)